Fill area
Generate candidate borehole heads inside a boundary while respecting buffers and exclusions. Preview spacing, rotation and count, then apply. Geometry and axis checks still apply after filling.
Step-by-step workflows · Menus and keyboard

| Control | Meaning / action | Unit | Range / choices | Example value |
|---|---|---|---|---|
| Pattern: | Grid: rows and columns. Staggered: every other row shifted by half a spacing (the closest packing). Row-wise: rows parallel to the longest edge, each filled from its start (GHEDesigner). Perimeter: along the edge of each drilling area only. | Grid / Staggered / Row-wise / Perimeter | ||
| Spacing: | Distance between neighbouring boreholes in a row (perimeter: along the edge). | m | 1 to 100 | 6 |
| Row spacing: | Distance between the rows; automatic: the spacing (grid, row-wise) or 0.866 × the spacing (staggered). | m | 0 to 100 | 0 |
| Along the longest edge | Rows parallel to the longest edge of the largest drilling area. Off: rows at the angle below (from east, counter-clockwise). | |||
| Row angle: | Direction of the rows from east (+x), counter-clockwise. | ° | -180 to 180 | 0 |
| Boreholes at most: | Most boreholes: the most spread-out ones are kept. 0 = every position that fits. | 0 to 5000 | 0 | |
| Minimum distance: | Additional minimum distance between boreholes (the site's minimum borehole distance applies as well). | m | 0 to 100 | 0 |
| Apply to the field | Replace the project field with the previewed fill; review geometry afterward and use Undo if needed. | |||
| Cancel | Close without accepting unapplied edits. | |||
| Spacing: | Distance between neighbouring boreholes in a row (perimeter: along the edge). | ft | 3.28 to 328.08 | 19.69 |
| Row spacing: | Distance between the rows; automatic: the spacing (grid, row-wise) or 0.866 × the spacing (staggered). | ft | 0 to 328.08 | 0 |
| Minimum distance: | Additional minimum distance between boreholes (the site's minimum borehole distance applies as well). | ft | 0 to 328.08 | 0 |