2D design and sizing
How the design inputs become a mean fluid temperature, how Calculate checks a design and how Size borehole length finds the required length.
One tutorial for every BoreTherm feature: the workflow in the program, how the calculation works, the theory behind it and a worked example in numbers. Each one reads on its own.
19 tutorials
How the design inputs become a mean fluid temperature, how Calculate checks a design and how Size borehole length finds the required length.
Why hourly loads need the heat capacity of the borehole, and how to size with the steady model and verify with the dynamic one.
How layered ground becomes effective properties, and what groundwater flow does to the field temperature and the borehole length.
Close heads, wide spacing at depth: how tilted boreholes are checked, enter the g-function and change the design.
How building loads become ground loads, the fixed and the temperature-coupled SPF, the coupling loop and choosing a machine.
From a test record to ground conductivity and borehole resistance: quality checks, evaluation methods and the recommendation.
A design length with a confidence level: sampling the uncertain inputs, percentiles and the sensitivity ranking.
Vary one or two inputs of one project, size or simulate every case, and read the results as curves and sensitivities.
Enumerate the layouts that fit the plot, size each one, rank them by length or cost and take a candidate into the project.
Place the field on the real plot: the drawing, setbacks and obstacles, the fill and site check, and what the positions do to the borefield.
Quantities times prices: how the estimate follows the length and the number of boreholes, and how sizing and the optimizer use it.
The same heating and cooling service by different systems: energy, SPF, annual full cost and CO₂ over the whole period.
Foundation piles as heat exchangers: the concrete model, the boundary conditions and the thermo-mechanical screening for the pile designer.
Charging and discharging a dense field: the operation series, the reversed flow, the ring coupling and how the recovery is counted.
Build and solve a finite-element model of the ground, compare it with the analytic design and reuse saved results.
Why the borehole buffers short loads, how the time steps are chosen and when the step tolerance must be tightened.
Groundwater flow and heat transport solved together: one coupled time step, and how Size with 3D finds the length.
Couple the borefield to heat pump or building models as FMUs: trust, the exchanged signals, the step size and the long-term mode.
How a report is built from the results, the templates and formats, and how to write one that someone else can reproduce.
Search by feature or choose a different topic.