HomeFeaturesExamplesTutorialsHelpTheoryVerificationPricingContact
Theory manual

BoreTherm Technical Reference

Theory and numerical methods of the BoreTherm borehole heat exchanger design tool

This manual describes the theory and the numerical methods of BoreTherm: the physical models, the equations and the algorithms behind every result the program computes. Equations are numbered by chapter. Each chapter can be read on its own together with the nomenclature of Chapter 2.

Chapters

  1. 1Introduction
  2. 2Nomenclature
  3. 3Ground model
  4. 4Thermal response factors (g-functions)
  5. 5Borehole thermal resistance
  6. 6Heat carrier fluids
  7. 7Loads
  8. 8Mean fluid temperature simulation
  9. 9Sizing and optimization
  10. 10Parametric studies and Monte Carlo
  11. 11Layered ground: segmented model, borehole sections and uniform fluid temperature
  12. 12Groundwater flow: moving finite line source
  13. 13Inclined boreholes and fields of unequal boreholes
  14. 14Borehole connection networks
  15. 15Short-time borehole model, TRCM parameters and load aggregation
  16. 16Site plan and constrained layouts
  17. 17Thermal response test evaluation
  18. 18The dynamic borehole model
  19. 19Borehole thermal energy storage operation
  20. 20Energy piles
  21. 21Thermal plume on the site plan
  22. 22Finite element ground model and 3D analysis
  23. 23Full FEM: transient boreholes and groundwater flow
  24. 24Co-simulation of the borehole field with system models
  25. 25Load tools: hourly loads from monthly loads, loads per year and load growth
  26. 26Input checks and safety checks
  27. 27The heat pump: from building loads to ground loads, and the choice of a machine
  28. 28Borefield costs
  29. 29Heating-system comparison and the coupled heat-pump economics
  30. 30Limitations and assumptions

Appendices

  1. AConventions of the classic monthly method

References