One program.
From the ground to the design.
Six areas of geothermal design, each with its tutorials, worked examples, help pages and theory.
Design and sizing
Build the borehole field, describe the building's demand, and find the length that keeps the fluid within its temperature limits for the whole design period.
- Mean fluid temperature, month by month or hour by hour, over 25 years or more
- Automatic sizing of the borehole length against the design limits
- Rectangles, lines, L- and U-shapes, free coordinates and unequal lengths, each with its own g-function
- Single, double and triple U and coaxial boreholes; multipole borehole resistance
- Water and antifreeze fluids, pressure drop, pump power and the freezing check
- Monthly, hourly and generated loads, load growth, and a dynamic borehole model for short pulses
- Tutorials
- 2D design and sizing, Dynamic borehole model and hourly loads
- Examples
- Borehole layouts, Borehole construction, Heat carrier fluids, Loads, Thermal simulation, Automatic sizing, Hydraulic networks
- Checked against
- Kavanaugh & Rafferty, Example 3.3, Kavanaugh & Rafferty, Chapter 4, Kavanaugh & Rafferty, Examples 3.2 and 3.5, Chiasson, Examples 6.5 and 6.6, Chiasson, Examples 5.4b to 5.6, Kavanaugh & Rafferty, Example 6.1, Chiasson, Example 10.2
- Help
- Design limits & simulation, Required borehole length, Field layout, Borehole cross-section
- Theory
- 4. Thermal response factors (g-functions), 5. Borehole thermal resistance, 8. Mean fluid temperature simulation, 9. Sizing and optimization
Ground, geometry and site
Bring the geology, the groundwater and the constraints of a real plot into the design, and check what the field does to its surroundings.
- Layered ground, the geothermal gradient and groundwater flow
- Inclined boreholes: fans, arcs and individually tilted axes
- Site plans from drawings: setbacks, usable area and fill patterns
- The thermal plume on the site plan and its distance to the plot boundary
- Thermal response tests: quality checks, evaluation and use in the design
- Tutorials
- Ground layers and groundwater, Inclined boreholes, Site plan and linked drawing, Thermal response test evaluation
- Examples
- Inclined boreholes, Ground modelling, Site planning, TRT evaluation, Thermal plume analysis
- Help
- Ground, Thermal plume, TRT evaluation
- Theory
- 11. Layered ground: segmented model, borehole sections and uniform fluid temperature, 13. Inclined boreholes and fields of unequal boreholes, 16. Site plan and constrained layouts, 17. Thermal response test evaluation
Studies and optimization
Let BoreTherm search for the best field, and find out how much the answer depends on what you do not know for certain.
- Layout optimization on a plot by drilled length, installation cost or life-cycle cost
- Parametric studies: one input at a time or full grids, with tornado charts and heat maps
- Monte Carlo analysis: uncertain inputs as distributions, percentiles of the length and the chance of meeting the limits
Advanced physics
Go beyond the standard design method when the project needs it: storage, piles, the full 3D ground and the rest of the plant.
- Borehole thermal energy storage: charging, discharging and the recovered energy
- Energy piles: wide, short heat exchangers under a building
- 3D finite element analysis of the ground, transient boreholes and coupled groundwater flow
- Co-simulation with heat pump and building models (FMI), and export of the field as a model
- Tutorials
- Borehole thermal energy storage, Energy piles, 3D analysis (FEM), Full FEM with transient boreholes, Full FEM with groundwater flow and heat, Co-simulation with FMUs
- Examples
- 3D and FEM analysis, Thermal energy storage, Co-simulation
- Checked against
- Laloui & Rotta Loria, problem 14.xx
- Help
- Storage, 3D analysis, Full FEM: Physics & run, Co-simulation results
- Theory
- 19. Borehole thermal energy storage operation, 20. Energy piles, 22. Finite element ground model and 3D analysis, 23. Full FEM: transient boreholes and groundwater flow, 24. Co-simulation of the borehole field with system models
Heat pump and economics
Choose the heat pump, price the borefield and compare the ground-source system with the alternatives for the same service.
- Heat pump selection: requirement sheet, candidate check, brine flow and pump head
- Borefield costs from unit rates or a detailed price list
- Comparison with air-source heat pumps, boilers, district heating and hybrids: cost of heat and CO₂
- Tutorials
- The heat pump, Borefield costs, Heating-system comparison
- Examples
- Cost estimation, Heating-system comparison
- Checked against
- Bonin, solution 18.2
- Help
- Heat pump selection, Borefield costs, System comparison results
- Theory
- 27. The heat pump: from building loads to ground loads, and the choice of a machine, 28. Borefield costs, 29. Heating-system comparison and the coupled heat-pump economics
Results and workflow
Keep the whole design in one project, document it, and run it from scripts when you need many variants.
- Results summary, charts and tables with export to images and CSV
- Design reports as PDF, HTML or Markdown
- Projects packed with their drawings, undo and redo, units and languages
- A command-line program with JSON output for batch runs and other tools
- Tutorials
- The report
- Examples
- Results and reports, Project management, Automation and interface
- Help
- Results summary, Report, Project, Command-line reference