Project units
Choose SI or supported imperial presentation units. Stored project quantities remain SI; display and exports follow selected units. Review unit labels when entering values. Number format and CSV delimiter are configured separately.
Step-by-step workflows · Menus and keyboard

| Control | Meaning / action | Unit | Range / choices | Example value |
|---|---|---|---|---|
| Temperature: | Temperatures. Temperature differences stay in K (in °F with °F). | °C (standard) / K (kelvin) / °F (degrees Fahrenheit) | ||
| Length: | Lengths and depths in metres. Diameters and wall thicknesses stay in mm. | m (standard) / ft (feet) | ||
| Power: | Heating and cooling powers (loads, peaks). The pump power stays in W. | kW (standard) / W / MW | ||
| Energy: | Heating, cooling and hot water energies. | MWh (standard) / kWh / GJ | ||
| Flow: | Fluid flow rates. kg/s uses the density of the heat carrier fluid. | l/s (standard) / m³/h / kg/s (with the fluid density) | ||
| OK | Accept changes and close. | |||
| Cancel | Close without accepting unapplied edits. | |||
| Standard units | °C, m, kW, MWh and l/s, as BoreTherm shows them. |